1

Full height riser slot

Use the card slots to connect full-height PCIe expansion cards on full height riser.

2

Power supply unit (2)

AC 550 W.
Both power supplies should be plugged in to power to provide redundancy.

3

Ethernet ports (4)
(The port labeled ‘Gb 1’ is the eth0 management port)

Use the Ethernet ports to connect Local Area Networks (LANs) to the system.

4

USB 3.0 port (2)

Use the USB 3.0 port to connect USB devices to the system. These ports are 9-pin, USB 3.0-compliant.

5

VGA port

Use the VGA port to connect a display to the system.

6

Serial port

Allows you to connect a serial device to the system.

8

CMA power port

The Cable Management Arm (CMA) power port enables you to connect to the CMA.

9

System identification button

The System Identification (ID) button is available on the front and back of the systems. Press the button to identify a system in a rack by turning on the system ID button. You can also use the system ID button to reset iDRAC and to access BIOS using the step through mode.